1
1
The plan of a building is in the form of a rectangle with center line dimensions of outer walls as 12.6 m × 17.6 m. The thickness of the wall in superstructure is 40 cm, the plinth area of the building will be
The plan of a building is in the form of a rectangle with center line dimensions of outer walls as 12.6 m × 17.6 m. The thickness of the wall in superstructure is 40 cm, the plinth area of the building will be
1). 210 m2
2). 234 m2
3). 247 m2
4). 284 m2
1). 210 m2
2). 234 m2
3). 247 m2
4). 284 m2
This Question has 1 answers.
Given:
Dimensions of outer walls = 12.6 m × 17.6 m.
Thickness of the wall = 40 cm = 0.40 m
Plinth area of the building = $(\left( {12.6 + \frac{{0.40}}{2} + \frac{{0.40}}{2}} \right) \times \left( {17.6 + \frac{{0.40}}{2} + \frac{{0.40}}{2}} \right))$
Plinth area of the building = (13 × 18) = 234 m2Similar Questions
- Point A is 30 metres to the east of point B. Point C is 10 metres to the south of Point A. Point D is 15 metres to the west of Point C. Point E is exactly in the middle of the Points D and F. Points D, E and F lie in a straight line. The length of the lin
- In an alloy, zinc and copper are in the ratio 1 : 2. In the second alloy, the same elements are in the ratio 2 : 3. If these two alloys be mixed to form a new alloy in which two elements are in the ratio 5:8, the ratio of these two alloys in the new allow
- Two towns P & Q are 275 km apart. A motorcycle rider starts from P towards Q at 8 a.m. at the speed of 25 km/hr. Another rider starts from Q towards P at 9 a.m. at the speed of 20 km/hr. Find at what time they will cross each other?
- Study the following information carefully to answer these questions.A vehicle starts from point P and run 10 km towards North. It takes a right turn and runs 15 km. Now it runs 6 km after taking a left turn. Finally, it takes a left turn, runs 15 km and s
- Three measuring rods are of length 120 cm, 100 cm and 150 cm. Find the least length of the fence that can be measure an exact number of times, using any of the rods. How many times each rod will be used to measure the length of the fence?